POWER YOUR BUSINESS!
CHARGE UP YOUR DAY!
ELECTRIFY YOUR MOBILITY
Question & Answers
Can I get an auxiliary contact block for 16A and 32A receptacles from MENNEKES?
Yes - this item can be found here or on page 22 of our Industrial plugs and sockets catalog (order number 41000).
Is there a 3-pin, 16A angled connector available for RV applications with a built-in SCHUKO® receptacle?
No - according to the current standard, this is no longer permitted. All our plugs and sockets and receptacle combinations for camping and RV applications can be found here: Plugs and sockets for camping, Receptacle combinations for camping.
Are there schematic diagrams for 3KRAFT and AirKRAFT products?
There are no schematic diagrams available for our 3KRAFT and AirKRAFT products. However, we can always provide you with detailed product information sheets with dimensional drawings. These can be found on the relevant product detail pages for Suspendable receptacle combinations on our website.
Do you carry cavity wall sockets in 32A?
No. Cavity wall installations are possible only for up to 16A 5p because the pull-off forces associated with 32A are too high. This is why there are no suppliers of 32A cavity wall sockets.
Which IP protection type requirements does the hinged window 40981 satisfy?
The hinged window 40981 complies with protection type IP67 (waterproof).
Are there protection type IP5x EverGUM products?
The products of our EverGUM family fulfil the requirements for protection type IP44 as standard. We would be happy to check whether we could equip an EverGUM product so that it meets the requirements for another protection type as a special solution.
Are there IP5x EverGUM products?
The standard IP protection classes for the EverGUM product series are IP 44 and IP 67. Another protection class can be considered on a case-by-case basis.
What does a 6 o'clock position indicate?
The clock position indicates the position of the protective earth (PE) conductor contact on the live end. More information can be found here
What does the standard 60309 mean?
The standard DIN EN/IEC 60309 is an international standard for plugs and sockets, electric couplers and device connectors that are primarily intended for industrial use (with nominal operating voltages of up to 1,000 V, 500 Hz and a nominal current of up to 125A). Part 1 of the standard describes the general requirements for all industrial connectors. Part 2 specifies a series of connectors with round enclosures with different numbers and arrangements of contact pins for different applications. Our CEE plugs and sockets are manufactured in accordance with this standard.
How are CEE plugs and sockets in accordance with DIN EN 60309 used?
You can find out how our CEE plugs and sockets in accordance with the standard DIN EN / IEC 60309 are used on pages 97 to 103 of our Industrial plugs and sockets catalog.