POWER YOUR BUSINESS!
CHARGE UP YOUR DAY!
ELECTRIFY YOUR MOBILITY
Whether AMTRON® wallboxes or AMEDIO® charging stations – charging solutions from MENNEKES are compatible with many leading energy management systems (EMS). You can see at a glance which charging system can be connected to which system in our overview.












MENNEKES charging stations are compatible with various 2-direction--electricity meters and enable functions such as blackout protection, dynamic load management and PV-surplus charging. When choosing, it is important to consider whether the meter is 1- or 3-phase as well as directly or indirectly measuring. The meter is set up during commissioning via a configuration tool or the web interface of the charging station.









These overviews do not constitute technical advice, but only serve as exemplary information for known and tested compatibility. MENNEKES cannot guarantee the accuracy and completeness of the information provided, for example if there are new software versions or product changes in the energy management systems. MENNEKES is therefore not liable for any damage that arises directly or indirectly from the use of this information.
[1] The energy meter must be configured as a Modbus TCP slave.
[2] The energy meter must be set as client ID "2".
On the web interface (parameter "Configuration of external meters") select the following setting:
[3] Modbus Janitza UMG 509 (TCP)
[4] Modbus Janitza UMG 604 (TCP)
[5] Modbus Janitza UMG 800 (TCP)
[6] Modbus Janitza UMG 801 (TCP)
[7] Modbus TQ EM300-LR (TCP)
[8] Modbus TQ EM410/EM420 (TCP)